Qee tus qauv nta hauv kev txhaj tshuaj molding tsim

Yas Txhaj Molding yog dav siv los ua cov khoom yas. Kev tsim cov khoom lag luam zoo xws li kev txiav qis qis, cov kab sib txuas zoo zoo, tsawg kaw qhov chaw thiab lwm yam, uas tuaj yeem pab tau zoo hauv kev txiav cov cuab yeej thiab cov nqi molding. Ntawm no, peb yuav tham txog qee tus qauv nta hauv kev txhaj tshuaj molding tsim, vam tias lawv tuaj yeem pab koj txhawm rau txhim kho koj cov khoom tsim.

Wall thickness - a consistent wall thickness usually can reduce theInjection Molding Parts defects such as warping, sinking etc. Also, it is good for the part to cool down evenly, this is helpful for the dimensions stability. Typically, the wall thickness around 2~3mm is good for molding.

Rounded features - doing the best to avoid any sharp corners and edges on the mold/product, as these features always lead to flow marks and stress. Meanwhile, if the product has unavoidable sharp corners and edges, we suggest selecting material in good flow ability to mold the products.

Draft -applying draft to vertical walls can increase its strength, also, the part can release easily when with corrected draft. It is necessary in the Txhaj Moulding Design.

Puas yog koj xaiv txoj cai ceev ceev raug tus khub rau koj txhaj tshuaj molding qhov chaw? TEAM Rapid muab cov cuab yeej thiab cov kev pabcuam molding ntawm cov nqi sib tw thiab zoo, xav paub ntau ntxiv txog peb? Hu rau peb pab neeg ntawm [email tiv thaiv] hnub no!